RTH XIFRA - USED COEX EXTRUDER

EXTRUSORAS COEX HASTA 3 CAPAS

A continuación presentamos un pequeño ejemplo de Extrusoras usadas COEX de hasta 3 capas…

Ask Information

Ref. 4057 USED REIFENHAUSER EVOLUTION 60/90/60 1600, year 2020

Manufacturer: REIFENHÄUSER
Model: EVOLUTION  60/90/60
Year: 2020
Number of layer: 3
Film structure: ABC
Materials: LDPE, LLDPE, BIO
Film Width: 1600 mm
Output: 450 kg/h
Extruder 1 Layer ref: : A
Screw diam: 60
Description: Gravimetric dosing units PLAT CONTROL 4 comp
Extruder 2 Layer ref: : B
Screw diam: 90
Description: Gravimetric dosing units PLAST CONTROL 4 comp
Extruder 3 Layer ref: : C
Screw diam: 60
Description: Gravimetric dosing units PLAST CONTROL 4 comp
Die diam (mm): 250 mm GAP 1.4
Thickness control system: Yes
IBC system: Yes
Bubble cage: yes
Take off unit: EVOLUTION T 1600.2 (reversing), speed 200 m/min
Min – Max lay flat: 800 mm – 1600 mm
Web Guide: yes 1600F
Rewinder Type: Shaft, SINGLE Evolution W-S 1600-01
Roll diameter: 1200 mm
Rewinder speed: 200 m/min
Corona Treatment: NO
…

Ref. 4056 USED REIFENHAUSER EVOLUTION 1300, year 2018

Manufacturer: REIFENHÄUSER
Model: EVOLUTION  60/70/60
Year: 2018
Number of layer: 3
Film structure: ABC
Materials: LDPE, LLDPE, BIO
Film Width: 1300 mm
Output: 300 kg/h
Extruder 1 Layer ref: : A
Screw diam: 60
Description: Gravimetric dosing units PLAT CONTROL 4 comp
Extruder 2 Layer ref: : B
Screw diam: 70
Description: Gravimetric dosing units PLAST CONTROL 4 comp
Extruder 3 Layer ref: : C
Screw diam: 60
Description: Gravimetric dosing units PLAST CONTROL 4 comp
Die diam (mm): 175 mm
Thickness control system: Yes
IBC system: Yes
Bubble cage: yes
Take off unit: Reversing EVOLUTION T 1300.2
Min – Max lay flat: 650 mm – 1300 mm
Web Guide: yes 1300F
Rewinder Type: Shaft, DOUBLE Evolution W-S 1500
Roll diameter: 1500 mm
…

VENDIDA / SOLD Ref. 4051 USED KIEFEL REIFENHAUSER EVOLUTION, year 2018

Manufacturer: KIEFEL REIFENHAUSER
Model: EVOLUTION 60/80/60
Year: 2018
Number of layers: 3
Film structure: A B C
Material: LDPE/BIO
Film Width: 1600
Extruder 1 Layer ref: : A
Screw diam: 60
Description: Gravimetric dosing units PLAST CONTROL
Extruder 2 Layer ref: : B
Screw diam: 80
Description: Gravimetric dosing units PLAST CONTROL
Extruder 3 Layer ref: : C
Screw diam: 60
Description: Gravimetric dosing units PLAST CONTROL
Die diam (mm): 225 mm
Bubble cage: yes
Panel for gussets: Yes
Take off unit: Oscillating 1600 mm wide
IBC system: yes
Rewinder Type: SINGLE
…

Ref. 4059 – USED WINDMOELLER & HOLSCHER OPTIMEX, year 2017

Manufacturer: WINDMOLLER & HOLSCHER
Model: Optimex
Year: 2017
Number of layers: 3
Film structure: ABC
Material: LDPE, LLDPE, MDPE
Film Width: 1800
Extruder 1 Layer ref: : A
Screw diam: 65mm
Description: 4 comp gravimetric doser, AC motor
Extruder 2 Layer ref: : B
Screw diam: 90mm
Description: 6 comp gravimetric doser, AC motor
Extruder 3 Layer ref: : C
Screw diam: 65mm
Description: 4 comp gravimetric doser, AC motor
Head description: Multicool automatic air ring, IBC,
Die diam (mm): 315mm
Thickness controll system: Automatic. Optifil
Bubble cage: yes, with wide rollers
Panel for gussets: yes
Take off unit: Rotating. Double collapsing panels with rollers and with wooden sticks
Corona treatment: yes
Web guide: yes
Rewinder Type: DOUBLE
…

Ref. 4042 USED WINDMOELLER & HOLSCHER OPTIMEX, year 2016

Manufacturer: WINDMOLLER & HOLSCHER
Model: Optimex
Year: 2016
Number of layers: 3
Film structure: A B C
Material: LDPE
Film Width: 1800
Output (Kg/h): 370
Extruder 1 Layer ref: : A
Screw diam: 60
Description: Gravimetric dosing units Doteco 5 comp
Extruder 2 Layer ref: : B
Screw diam: 90
Description: Gravimetric dosing units Doteco 5 comp
Extruder 3 Layer ref: : C
Screw diam: 60
Description: Gravimetric dosing units Doteco 5 comp
Die diam (mm): 250 mm – Additional die 160 mm
Thickness controll system: Thickness gauge Kundic control OPTIFIL
Bubble cage: yes
Panel for gussets: Yes
Take off unit: Oscillating 1800 mm wide
Corona treatment: yes CASON
Rewinder Type: SINGLE
…

Ref. 4041 USED BANDERA, year 2016

Manufacturer: BANDERA
Year: 2016
Number of layers: 3
Film structure: ABC
Material: Agricultural film
Film Width: 5000
Extruder 1 Layer ref: : A
Screw diam: 120mm
Description: Make Bandera, gravimetric dosing unit Doteco
Extruder 2 Layer ref: : B
Screw diam: 160
Description: Make Bandera, gravimetric dosing unit Doteco
Extruder 3 Layer ref: : C
Screw diam: 120
Description: Make Bandera, gravimetric dosing unit
Head description: Make Bandera
Die diam (mm): 1600
Thickness controll system: Automatic
Panel for gussets: Yes
…

Ref. 4054- USED KIEFEL KIRION, year 2010

Manufacturer: KIEFEL
Model: KIRON ( COEX )
Year: 2010
Number of layers: 3
Film structure: ABC
Material: LDPE, LLDPE, MDPE
Film Width: 2200
Output (Kg/h): 600 depending on material
Extruder 1 Layer ref: : A
Screw diam: 70mm
Description: 26L/D .Gravimetric dosing unit 5 components. Motor AC 75Kw. Hydraulic screen changer
Extruder 2 Layer ref: : B Screw diam: 100mm
Description: 26L/D.Gravimetric dosing unit 4 components. Motor AC 145Kw. Hydraulic screen changer
Extruder 3 Layer ref: : C Screw diam: 70mm
Description: 26L/D.Gravimetric dosing unit 5 components. Motor AC 75Kw. Hydraulic screen changer
Head description: Kirion 250/500-3 suitable for die diam 250-500mm .
Cool ring Perfect cool . IBC
Die diam (mm): 400mm and 500mm
Thickness controll system: Yes automatic Profile Control C2
Bubble cage: Additional ultrasonic bubble control N2200-C including ultrasonic web detector. Motorized adjustment
Take off unit: Rotating T2200, Zero Touch 2200 air cushion
Corona treatment: Double side
Web guide: Yes
Rewinder Type: Double
Rewinder max reel diameter: 1200
…

Ref. 4060- USED MACCHI EXTRUDER, year 2010

Manufacturer: MACCHI
Model: COEX 3
Year: 2010
Number of layers: 3
Film structure: ABC
Material: LDPE, LLDPE, Thickness 20 – 200 micron
Film Width: 1800
Output (Kg/h): 400 kg/h
Extruder 1 Layer ref: A
Screw diam: 65/30 D
Description: 4 heating Doteco 6 comp zones – AC motor 74kw, hydraulic screen changer, gravimetric blendeer
Extruder 2 Layer ref: B
Screw diam: 100/30 D
Description: 5 heating Doteco 6 comp zones – AC motor 180kw, hydraulic screen changer, gravimetric blendeer
Extruder 3 Layer ref: C
Screw diam: 60/30 D
Description: 4 heating Doteco 6 comp zones – AC motor 74kw, hydraulic screen changer, gravimetric blendeer
Head description: Coex Flex TE 503; die range 300-500 mm, IBC , blowing and exhaust fan 11kw controlled by inverters.Automatic air ring KArat
Thickness controll system: Automatic profil control, plascontrol magic flow
Bubble cage: No marking system GSRC 2350/8 – 5 with 5 lavels and 8 syncro arms with motorized remote controlled opening and height adjustment, 4 x Ultrasonic sensors for auto control of IBC.
Panel for gussets: Yes, motor driven
Take off unit: Oscillating ST 199 – 1800 oscillating width 1800 mm useful 1700 mm – S shape double cooling
Corona treatment: Yes
Web guide: E & L
Rewinder Type: Double back to back
Rewinder max reel diameter: 1200 mm
…

VENDIDA / SOLD Ref. 4022- Extrusora coex 3 layer MACCHI, year 2010

Manufacturer: MACCHI
 Model: COEX3
 Year: 2010
Number of layers: 3
 Film structure: Stretch hood up to 3800mm
Material: LDPE, LLDPE
Film Width: 1700
Output (Kg/h): 400
 Extruder 1 Layer ref: : A
Screw diam: 65
Extruder 2 Layer ref: : B
Screw diam: 100
 Extruder 3 Layer ref: : C
Screw diam: 65
Head description: IBC
Die diam (mm): 400 gap 2mm
 Panel for gussets: Yes, motor driven
Take off unit: Oscillating
Web guide: E&L
Rewinder Type: Back to back BIOPLUS + Easy load
Rewinder max reel diameter: 1200

Ref. 4047- Used WINDMOLLER & HOLSCHER VAREX , year 2006

Manufacturer: WINDMOLLER & HOLSCHER Model: VAREX
Year: 2006
Number of layers: 3
Film structure: ABC
Material: LDPE, LLDPE, MDPE
Film Width: 1800
Output (Kg/h): 350Kg/h
Extruder 1 Layer ref: : A
Screw diam: 60mm
Description: Gravimetric doser Doteco 5 comp
Extruder 2 Layer ref: : B
Screw diam: 90mm
Description: Gravimetric doser Doteco 5 comp
Extruder 3 Layer ref: : C
Screw diam: 60mm
Description: Gravimetric doser Doteco 5 comp
Die diam (mm): 250
Thickness controll system: Thickness gauge Kundic control OPTIFIL P3
Bubble cage: yes. Utlasonic sensors for width control
Panel for gussets: yes
Take off unit: Fixed
Corona treatment: CASON
Rewinder Type: SINGLE
Rewinder description: Width 1800mm
…

Ref. 4033- Used TECNOVA , year 2006

Manufacturer: TECNOVA
Year: 2006
width : 2X1780 mm
capacity kg/h: 100 Kg/h
Blown film of 2 or 3 layers A/B or A/B/A.
Extruder A : 60/30D
Extruder B : 90/33D
Heating : 5 heating zones
Width : 2 X 1780 mm
State : ready to test
Automatic pellet loader
Extruder group 2 extruders
Extrud A: Ø60/30D: Extrud B 90/33D
Extruder :cylindrical die
Forming unit :calibrator
Cooling of the primary film with open circuit of cooled water regulated. Primary Film dryer by air
3 levels of oven to heat the film to be blowned
Thermo-regulator 5 Zones for each extruders unit
Layer unit: A-B or A-B-A
Cooling of the primary film with open circuit of cooled water regulated.
Primary Film dryer by air
3 levels of oven to heat the film to be blown
…

Ref. 4058- Used extruder DOLCI, year 2005

Manufacturer: DOLCI
Year: 2005
Number of layers: 3
Film structure: ABC
Film Width: 2000
Extruder 1 Layer ref: : A
Screw diam: 65 mm
Description: 6 components doteco gravimetric dosing; AC motor 74Kw
Extruder 2 Layer ref: : B
Screw diam: 65 mm
Description: 6 components doteco gravimetric dosing; AC motor 74Kw
Extruder 3 Layer ref: : C
Screw diam: 65 mm
Description: 6 components doteco gravimetric dosing; AC motor 74Kw
Head description: IBC, Karat automatic air ring
Die diam (mm): 350 mm
Thickness controll system: Yes, automatic
Bubble cage: Motorized, 3 ultra sonic sensor for auto width control, Kundig gauge K100 , Karat air ring for automatic thickness profile adjustment
Corona treatment: 2 double corona treatment Cason (tot 4 sides)
Rewinder Type: Double
Additional informations: Chiller
…

Ref. 4049- Used HOSOKAWA ALPINE COEX 2.200, year 2004

Manufacturer: HOSOKAWA ALPINE
Model: COEX 2.200 
Year: 2004
Co-extruded Blown Film Plant Brand Hosokawa Alpine Model HS 50/75/50 S
Nr. 3 Co-extruder Diameters 50/75/50 L/D 30/30/30
Three Layer Coextrusion
Head type TBF 16-32 K
Cooling ring HK 500
Die diameter 220 mm
Internal bubble cooling unit type IBC
Nr. 3 Gravimetric Dosing units CONTREX
Controll unit for thickness and diameter setting
Corona Treatment CASON
GHIOLDI Oscillating Take-Off type TR working width 2.200 mm
GHIOLDI Automatic Double Winder type BGH2 MIX, working width 2.200 year 2004
Plant height approx. 13m
EUROCHILLER chiller type ABF 30
…

Ref. 4045- Used REIFENHAUSER, year 2003

Manufacturer: REIFENHAUSER
Year: 2003
Number of layers: 3
Film structure: ABC
Material: LDPE, LLDPE, MDPE Others in blends
Film Width: 2300
Output (Kg/h): 400
Extruder 1 Layer ref: : A
Screw diam: 60
Description: Gravimetric dosing system Doteco 5 comp
Extruder 2 Layer ref: : B
Screw diam: 80
Description: Gravimetric dosing system Doteco 5 comp
Extruder 3 Layer ref: : C
Screw diam: 60
Description: Gravimetric dosing system Doteco 5 comp
Die diam (mm): 400 mm
Thickness controll system: Automatic thickness profile control
Bubble cage: Motorized
Take off unit: oscillating take off unit Reinhold wide 2300 mm with gusseting panels
Corona treatment: MERO
Web guide: E+L
Rewinder Type: Double back to back
…

Ref. 4005- Extrusora coex 3 layer used MACCHI FROM 2002

Manufacturer: MACCHI
Year: 2002
Number of layers: 3 55/80/55
Film structure: ABC ( Layers distribution A: 30%-25% B: 40%-50% C: 30%-25% )
Material: LDPE, LLDPE, BLENDS HDPE, MDPE, mLLDPE .
Film thickness min. and max 20 – 200 micron
Film Width: 1600
Output (Kg/h): 350 kg/hr max.capacity, 8.4 tons/day 2.800 tons/year max.capacity
Die diam (mm): 350mm
Thickness controll system: KUNDIG K 100
Corona treatment: FERRARINI BENELLI
Rewinder max reel diameter: 850mm
…

Ref. 4004- Used Extrusora machine KIEFEL 3 layers, year 2002

Manufacturer: KIEFEL 
 Year: 2002
Number of layers: 3
Overhaul/renovation: Renovated 2013-2015 – New Screws and cylindres ,
Film structure: A- B-C , B-A-C
Material: LDPE, LLDPE
Output (Kg/h): 450 Kg/h
Extruder 1 Layer ref: : A
Screw diam: 70mm
Description: Gravimetric
Extruder 2 Layer ref: : B
Screw diam: 90mm
Description: Gravimetric
Extruder 3 Layer ref: : C
Screw diam: 70mm
Description: Gravimetric
Head description: Automatic with Innoplast control system
Die diam (mm): 450 gap 1,7mm
Thickness controll system: Innoplast , Inno Plast air ring new 2013
Bubble cage: NO
Additional informations: thickness 20 my to 300my
ONLY HOT PART
…

Ref. 4055- Used GHIOLDI, year 2000

Manufacturer: GHIOLDI
Model: COEX 3
Year: 2000
Number of layers: 3
Film structure: ABC
Material: LDPE/LLDPE, HDPE
Film Width: 2200
Output (Kg/h): 450
Extruder 1 Layer ref: : A Screw diam: 65/30
Extruder 2 Layer ref: : B Screw diam: 80/30
Extruder 3 Layer ref: : C Screw diam: 65/30
Head description: Coex3 IBC
Die diam (mm): 450 and 350
Bubble cage: Yes
Panel for gussets: Yes
Take off unit: Oscillating Corona treatment: Yes
Web guide: Yes
Rewinder Type: Back to back automatic roll changeover
Rewinder max reel diameter: 1000
…

Ref. 4043- Used BANDERA, year 2000

Manufacturer: BANDERA
Year: 2000
Nr.1 Extruder mono screw BANDERA type TR50S/30D year 2000
Nr.2 Extruder BANDERA type TR35S/30D year 2000
Nr. 2 manual filter exchanger type BDL 35.
Nr. 1 manual filter exchanger type BDL 50.
Nr. 2 drivers in C.C. with 2 motors of 17,1 KW ABB brand, with thyristors MENTOR II Control Technique.
Nr. 1 driver in C.C. with 1 motor of 35,5 KW ABB brand with thyristors MENTOR II Control Technique.
Nr. 1 BANDERA ACHE/R extrusion fixed head for 3 coextrusion layers. Die range 100-200 mm. diameter. Equipped with 150 mm. die diameter year 2000.
Nr. 1 Electric control cabinet for 22 zones temperature control, practically new.
Nr. 1 BASCHET tubular calibration cage guide serie RA 1200 8-6/CS.
Nr. 1 web guide film E+L brand.
Nr. 1 fix take off Mod. BANDERA TE. Width 1200 mm year 2000 with side gussets.
Nr. 1 Structure tower included.
Nr. 1 Corona treater FERRARINI & BENELLI brand 1200 mm. width.
Nr. 1 Chiller system.
Nr. 1 Double rewinding unit BANDERA TPE 1200 floor discharge.
MACHINE PRACTICALLY ARE NEW. USED ONLY 200 HOURS IN 20 YEARS IN LABORATORY FOR TESTS.
…

Ref. 4019- Used TECHNO COATING ENGINEERING, year 1995

Manufacturer: TECHNO COATING ENGINEERING
Year: 1995
Number of layers: 3
Film structure: ABC
Material: LDPE, LLDPE, MDPE (blends)
Film Width: 2400
Output (Kg/h): 300
Extruders: 70/70/70
Head description: with IBC
Die diam (mm): 400
Bubble cage: yes
Panel for gussets: yes
Take off unit: rotating
Corona treatment: Ferrarini Benelli
Web guide: yes
Rewinder Type: Double back to back
Additional informations: Structure/Tower included, heigth 11mm
…

Ref. 4021- DIE HEAD from CMG

Manufacturer: Die Head from CMG
Model: Coex 3 layer 
Die 400 mm
Die cap 2,5 mm
3 cooling fan
IBC system

MENÚ