LAMINADORAS COATING
A continuación presentamos un pequeño ejemplo de Laminadoras + Coating disponibles.
Si buscan un modelo en concreto o tienen alguna consulta no duden en contactar con nosotros.
También podemos gestionar la venta de sus máquinas.
Quedamos a su disposición.
Ref. 25016- Used CONVERTECH LAMINATOR, year 2018
- Manufacturer: CONVERTECH
- Model: PRIMER AND LAMINATING
- Year: 2018
- Application: Lamination + coating
- Type of lamination/coating: Water based, wet and dry primer , adhesive
- Working width (mm): 1650
- Materials: BOPP, PP synthetic paper
- Speed: Mech.250 m/min
- First unwinder type: Turret automatic non stop, double unwinding direction 76 and 152 mm cores
- Max diameter reel unwinder: 1000
- Secondary unwinder type: Turret automatic non stop, double unwinding direction 76 and 152 mm cores
- Rewinder type: Turret automatic non stop, double winding direction 76 and 152 mm cores web tension range: 15-40 Kg
- Max diameter reel rewinder: 1000
- Coating unit: trolley based , 2 trolleys, 1 gravure trolley and 1 «Two roll coating system with Mayer bar
- Second Coating unit: solventless 4 roll system
- Drying: 5 zones – with 5 tunnels 4 mt long each one totally 20 mt . Each tunnel with independent ventilation and steam heat exchanger
- pumping mixing unit: Yes
- Corona treatment : Yes two side corona treater
- Additional Information: In-line solventless lamination unit solventless coating unit usabel also for silicone coating
- …
Ref. 25020- Used SAM LAMINATION COATING, year 2017
- Manufacturer: S.A.M.
- Year: 2017
- Application: Lamination + coating
- Type of lamination/coating: SOLVENT / WATER BASED
- Working width (mm): 1250
- Materials: Film, Paper , AL foil from 12 microns
- First unwinder type: Turret automatic
- Max diameter reel unwinder: 1000
- Secondary unwinder type: Turret automatic
- Rewinder type: Turret automatic
- Max diameter reel rewinder: 1000
- Coating unit: Gravure coating unit sleeves type with trolley
- Second Coating unitr: Gravure coating unit with gravure trolley and Semiflexo trolley Trolleys are interchangeable with station 1
- Drying: 1st coating unit – 2 zone drying section – total air inlet 7000 Nmc/h1 vertical dryer 1,8 m Max T°C 120 and following 1 Horizontal Dryer 3 meter – Max T 150 °CTotal installed power 300.000 Kcal /h 2nd coating unit 4 zones Drying section – Total air inlet 18.000 Nmc/h – 1 vertical dryer 3.0 m Max T°C 120 and following 3 horizontal dryers of 3 meters each Max T °C 150 – 200 – 150 Total installed power 800.000 Kcl/h
- Additional Information: Automatic LEL control for driers , Automatic Viscosity control , Chillers , CO2 fire extinguisher complete on the machine , Full ventilation system with thermal oil heat exchangers , Antistatic bars
- …
VENDIDA / SOLD Ref. 25019- Used EXTRUSION COATING SML BEC/P/90,60/1800/450, year 2016
- Manufacturer: SML
- Model: BEC/P/90,60/1800/450
- Year: 2016
- Width (mm): 1850
- Coating/lamination units: 1 Coextrusion Lamination section , 1 Gravure coating unit
- Coating/lamination unit 1 description: 1 SML Single-Screw Extruder SML-ES-90/33 with 1 pc. Adaptors and combi melt filter 90 for main extruder
- 1 Gravimetric batch dosing system for 3 components mounted directly on the extruder
- 1 SML Single-Screw Extruder SML-ES-60/33
- 1 Gravimetric batch dosing system for 4 components mounted directly on the extruder 1 pc. 3- Layer feedblock VG design variable geometry, with
- – cartridge heaters, 2 separate control zones
- 1 EBR IV Flat die Cloeren 1.850 mm for automatic die bolt control (73 Automatic die bolts, 4 manual die bolts, distance between bolts 25,4mm)
- Die suction system 1.850 mm
- 1 LAMINATOR / COOLING AND TAKE OFF UNIT Laminator BKE1/ 800G/200GU/250ST-18
- Coating/lamination unit 2 description: PRIMER COATING UNIT 1 Gravure . Primer coating unit with drying tunnel WOB 1800 for water based primers
- material width max. 1.650 mm
- Treatment: 1 pc. Corona treatment system for one side treatment
- Primary unwinder description: . Turret Unwind autosplice EcoFlex/1800/SL/3″,6″/450 unwinding diameter max. 1.270 mm 1 pc. Constant gap unit 1800
- Secondary unwinder description: 1 pc. Turret Unwind EcoFlex/1800/SL/3”,6”/450 , unwinding diameter max. 1.270 mm 1 pc. Constant gap unit 1800
- Rewinder description: WINDING UNIT SERIES 1500 , . Turret Winder W1500/1800/SL/3”,6”/450
- Product structure / Materials: : LDPE, LLDPE, PP, EMA (Ethylene Methacrylic Acid), EAA (Ethylene Acrylic Acid)
- Additional Information: : LDPE, LLDPE, PP, EMA (Ethylene Methacrylic Acid), EAA (Ethylene Acrylic Acid)
- …
Ref. 25017- Used KROENERT / BMB COATING MAHCINE, year 2012
- Manufacturer: KROENERT / BMB
- Year: 2012
- Application: Coating
- Type of lamination/coating: Primer + barrier lacquers (water based) , Primer + acrylic adhesive/PVdC (double sided). Other applications
- Working width (mm): 1300
- Materials: BOPP 10 – 80 μ;PET 6 – 60 μ;Paper 20 – 150 g/m2;PVC hard (blister) 20 – 300 μ (must be tested);Alu foil soft 7 – 80 μ
- Speed: 300 m/min Max. mechanical speed
- First unwinder type: Automatic Turret
- Max diameter reel unwinder: 1000
- Rewinder type: Automatic rewinder
- Max diameter reel rewinder: 1000
- Drying: Heating system Electric ,1 x 5 meter dryer (for primer),1 x 10 meter dryer (for secondary coating)
- Corona treatment : Yes, AFS on both sides
- Coating rollers: Number and sizes airshafts 6 x 3” ;4 x 6”
- Additional Information: Only 7000 running hours
Min./Max. coating width 700 – 1300 mm
Unwind/rewind shafted - Web guide: BST EKR 500 Plus
- This machine has two coating stations which both can coat on both sides of the web
Station 1: For primer - Coat weight dry 0,5 – 1 g/m2
- Solid content: Max 30%
- Station 2: For PVdC/Acryclic adhesive
- Both coating materials have their own Reco 800A trolley which can be changed in the machine.
- …
Ref. 15088- Used UTECO TECHNOLAMI MISTRAL, year 2011
- Manufacturer: UTECO TECHNOLAMI
- Model: MISTRAL
- Year: 2011
- Application: Lamination + coating
- Type of lamination/coating: COMBI
- Working width (mm): 1320
- Materials: BOPP, PET , CPP , LDPE paper , Al Foil
- First unwinder type: Shaftless driven
- Max diameter reel unwinder: 1000
- Secondary unwinder type: Shaftless driven
- Rewinder type: Shaftless driven
- Max diameter reel rewinder: 1000
- Coating unit: Solvenbtless trolley and gravure trolley
- Drying: 2 zones , 4 fans , 2 x 3mt tunnel total length 6 mt , 2 gas burners
- Register controll: Yes for cold seal
- pumping mixing unit: Yes
- Corona treatment : yes
- Additional Information: Sleeve change system for counter im pression nip roller
- Sleeve change system on transfer roller for solventless trolley
- …
Ref. 25008- Used CMR laminator, year 2009
- Manufacturer: CMR
- Year: 2009
- Application: Coating
- Type of lamination/coating: HOT MELT/WAX
- Working width (mm): 1500
- Speed: 250 m/min
- Coating rollers: Chrome coating rolls heated with Thermo oil
- Additional informations: LEL system
- -Anilox rollers with ceramic coating
- -Sleeves system
- -Doctor chamber blades
- -2 cooling rollers
- -Rubber press roll
- -Euroklimat Heating unit
- …
Ref. 15078- Used ACOM VARIANT 12, year 2003
- Manufacturer: ACOM
- Model: VARIANT 12
- Year: 2003
- Application: Lamination + coating
- Type of lamination/coating: SOLVENT BASED AND SOLVENTLESS
- Working width (mm): 1300
- Materials: PAPER – PLASTICS FILMS AND ALLUMINIUM
- Speed: 500 MT/MIN
- First unwinder type: Shaftless driven
- Max diameter reel unwinder: 1000
- Secondary unwinder type: Shaftless driven
- Max diameter reel unwinder: 1000
- Rewinder type: SINGLE-SHAFTLESS
- Max diameter reel rewinder: 1000
- Coating unit: Trolley based with solventless and gravure trolleys
- Third Coating unit:
- Drying: 2 zone with 4 fans, extended drying tunnel 5 mt long and thermo oil heat exchangers
- Register controll: YES
- pumping mixing unit: Yes one for 2 componenst solventless adhesives and one for solvent based
- Corona treatment : ME.RO
- …
Ref. 25018- Used SCHIAVI ECOFLEX, year 2001
- Manufacturer: SCHIAVI
- Model: ECOFLEX
- Year: 2001
- Application: Lamination + coating
- Type of lamination/coating: COMBI
- Working width (mm): 1350
- Speed: 300/M/MIN
- First unwinder type: SINGLE SHAFTLESS
- Max diameter reel unwinder: 1000
- Secondary unwinder type: SINGLE SHAFTLESS
- Rewinder type: SINGLE SHAFTLESS
- Max diameter reel rewinder: 1000
- Coating unit: AVAILABLE WITH ROTOGRAVURE TROLLEY NOT SOLVENTLESS
- Drying: ELECTRIC
- Corona treatment : NO
- …
Ref. 15092- Used SCHIAVI CONVERT JET 074, year 2000
- Manufacturer: SCHIAVI
- Model: CONVERT JET 074
- Year: 2000
- Application: Lamination + coating
- Type of lamination/coating: ADHESIVE . Solvent based + 2nd unit coating, coldseal, varnish
- Working width (mm): 1250
- Speed: 250 max mechanical Speed
- First unwinder type: Double Turret
- Max diameter reel unwinder: 1000
- Rewinder type: Double Turret
- Max diameter reel rewinder: 1000
- Register controll: Yes
- Corona treatment : DGM 2000 / Ahlbrandt
- …
Ref. 25009- Used SIDECO, year 1999
- Manufacturer: SIDECO
- Year: 1999
- Application: Coating
- Type of lamination/coating: Coating adhesive paper tapes /Water Based
- Working width (mm): 1650
- Speed: 150mt/min
- First unwinder type: TURRET AUTOMATIC
- Max diameter reel unwinder: 800
- Rewinder type: TURRET AUTOMATIC
- Max diameter reel rewinder: 800
- Coating unit: Mayer bar
- Drying: Gas unit 600.000 Kcal/hr (included) ; 5 dryer section of 3m; pumping mixing unit: No
- Corona treatment : No
- …
Ref. 25012- Used SCHIAVI CONVERJET, year 1998
- Manufacturer: SCHIAVI
- Model: CONVERJET
- Year: 1998
- Application: Lamination + coating
- Type of lamination/coating: solvent based two stations
- Working width (mm): 1220
- First unwinder type: Turret Automatic
- Max diameter reel unwinder: 800
- Secondary unwinder type: single position
- Max diameter reel unwinder: 800
- Rewinder type: Turret automtic
- Max diameter reel rewinder: 1000
- Coating unit: Rotogravure
- Drying: extended drier 8 mt long , 2 zones , 2 blowing fans one exhaus
- …
Ref. 25013- Used SCHIAVI CONCORDE, year 1994
- Manufacturer: SCHIAVI
- Model: CONCORDE
- Year: 1994
- Application: Coating
- Working width (mm): 1220
- First unwinder type: Turret automatic
- Max diameter reel unwinder: 1200
- Rewinder type: Turret automatic
- Max diameter reel rewinder: 1200
- Coating unit: Gravure solvent based
- Second Coating unitr: Gravure solvent based
- Drying: One preconditiong hood, each unit double hood after each coating unit with two blowing fans one exhaust fan
- Register controll: Yes Bobst Registron before second coating unit
- Additional informations: 2 coating unit , possible two coating one side or 1 each side ( fron and back )
- …
Ref. 25014- Used POLYTYPE 522, year 1982
- Manufacturer: POLYTYPE
- Model: POLYTYPE 522
- Year: 1982
- Application: Coating
- Type of lamination/coating: SOLVENTLESS
- Overhaul/renovation: 2003
- Working width (mm): 1040
- Materials: Paper, PET, PA, OPS, OPP,Aluminium
- Speed: 300 m/min
- First unwinder type: Single
- Max diameter reel unwinder: 1000
- Secondary unwinder type: Single
- Max diameter reel unwinder: 1000
- Rewinder type: Turret
- Coating unit: 5 roller for solventless
- …
